This error appears when we replaced an old monitor, which was transmitting at a different refresh rate than the new monitor. This refresh rate is nothing more than the number of times an image is displayed in a second. This also happens to avoid damage when the saved speed is different from that required by the new monitor.
In this case, we will tell you what you should do to solve this problem that does not generate major complications. While it may sound a bit technical, it won't be as difficult as when trying to fix a PC that has video card issues.
How to fix monitor out of signal, out of range problem in Windows
There are also other possible causes for this out of reach error and that is that you are switched to a new video card and you're still using the same old monitor. As these cannot support resolutions new video cards can.
Another possible cause of this problem has to do with incompatible drivers. It may also happen that the value in which the resolution is set cannot be displayed by the monitor.
For this reason it is important to install monitors and video cards that can support high resolutions. For example, if we are using Windows 8 or 10, it is recommended that monitors work with minimum resolutions of 1024 x 768. As you can understand, older monitors cannot support these high characteristics.
Steps to fix monitor out of signal, out of range issue in Windows
To fix this problem, many times you just need to change the display settings, if you are using Windows version below 10, you can do the following. Go to the desktop and to any unused area, right click, a context menu will appear and you will select Screen settings or Screen resolution.
This action will show you a window and show you the recommended resolution for the type of monitor you are using. If you are using the recommended resolution and the problem is not solved, try a lower value.
On the other hand, if you are using Windows 10, go to the desktop and right click and select Display Settings. While in the window you have to look in the Display tab and then go to the option Additional screen settings. Accept the permissions, then click Apply and finally you need to click the Save Changes option.
This out of range error may occur when you are using an application or want to play video games. So you need to make changes to the configuration file, it is a text document that has an ini or tex extension or doesn't have one. To find it go to the Documents tab of Windows Explorer.
Once found, open it with notepad, to do this, select the file and right click and select Open with. Now look for these parameters: DisplayWidth or NativeWidth: indicates horizontal resolution and should be 800 - DisplayHeight or NativeHeight - indicates vertical resolution and should be 600
In other cases, the developers may have set a very high value for the screen resolution. So we need to reduce it, find the parameter RefreshRate and change the value to 50-60. The last thing to do is to save the changes made to the file and run the application again.
This way you will be able to solve this problem that was causing you headache and in simple steps you have learned how to fix monitor out of range problem in windows.
