How to find out the IP address of my Linux computer using the command?

Whenever we acquire a Electronic device, be it mobile phone, computer, router, etc. we need to know and have its technical specifications at hand.

Having this knowledge we will be able to use these devices efficiently. And one of these data we need to know is the IP address. That's why in the following article you we will tell how to know the IP address of my Linux computer using the command.

Of course you should already know what the IP address is, but if you don't know it, this is nothing more than an identification number that a device must be able to use the internet. This address is very easy to find on your device running Linux system. Therefore, in the next tutorial we will tell you how to know the IP address of my Linux computer using the command.

Taking this knowledge into account is very important and in repeated publications we have explained how to use the IP address and how to locate it on devices such as router. By means of this IP address, a person's position can be perfectly traced to any part of the world.

How to find out the IP address of my Linux computer using the command

Sure, you can find this information easier but you need to have an internet connection since you have to do it via the search engine. By entering what your IP is you will find many pages that will offer you this information. But we will tell you how you can do it easily through the use of commands.

In other operating systems you will not find many commands to be able to find the IP address of a Linux computer. And then we will tell you what they are and how they are put into practice so that you can have this information at your fingertips, in case you want to know about it or even so that you can change it.

The first command we're going to show you is the most common one for locating your computer's IP address and it is IFCONFIG. Because we say that it is the most used, since through this command we will associate an IP address to another computer that uses the network. With it you can see the parameters of the different network interfaces.

Type this command and you will see information related to different counters, but you can find the IP address in inet addr. There you will find a series of numbers divided by three points, you can also use this command to find the IP address of a specific interface. In that place you have to write IFCONFIG followed by the name of the interface which can be wlan0.

Other commands you can use to find out the IP address on my Linux computer

We will now use another command with which you will find the IP address very quickly and it is through IP addr. Here you will get not only the IP address but also important interface information.

Now it's your turn to show you another command which will also show you what your IP address is and it's the command hostname. When you use it, you set the administrative settings of the network in motion. You will be able to see the IP addresses of those network connections that are active at that moment.

We will now talk about the ip router command, through it we can perform a very important and basic configuration. And it's about the static route, not only can we know our IP address. We can also greatly increase the performance of the network, it is usually used in small networks.

To conclude with this interesting article, we will name a last command that through it we can deactivate, activate, create, modify and delete the connections. And it's about the nmcli command and is known as the network manager command line interface.

So this is how we conclude this article, hoping it was very helpful so that you can locate this important information. And without major complications we were able to teach you how to know the IP address of my Linux computer using the command.